The WireXpert completes CAT6A certification test in less than 9 seconds and Class FA testing in 15 seconds. It offers easy navigation through the screens on the device, and offers professional reports through its PC software ReportXpert. It sets new standards for user friendliness with touch screen graphical interface at both local and remote ends. An innovative approach to permanent link testing combines superior measurement accuracy with low cost of ownership and ease of use.

Designed for certifying CAT 6A, CAT 7, and CAT 7A cabling and beyond with measurement frequency range of 1-1600 MHz. Optional dual wavelength fiber adapters are available for multimode and singlemode fiber certification. WireXpert comes with an intuitive touch sensitive user interface featuring bright color LCD screen, making cable certification testing easier than ever. WireXpert’s remote unit is identical to the main unit, making it easy to operate the tester whether the testing is coordinated by two technicians or only one.

Cable Manufacturer Approvals:
The world's leading cable manufacturers have extensively tested the WireXpert and approved it for field certification and associated warranties of their structured cabling solutions. Approvals for the WireXpert have been obtained from: Beldon, Siemon, Datwyler, CommScope, HellermannTyton Data, Leoni Kerpen, Leviton Network Solutions, Panduit, Tyco Electronics AMP, ZVK.

CAT 7A (Class FA) Testing:
WireXpert is the only tester in the market with the capability to certify Class FA cabling systems over its entire specified frequency range with required measurement accuracy. In fact, WireXpert’s measurement engine is capable of testing against future cabling standards required for 40G and 100G Ethernet over copper cables.



More downloads:

• WireXpert - Automatic Cable Labeling
• WireXpert - Patch Cord Test Solution
• WireXpert - User Guide (copper)
• WireXpert - User Guide (fibre)

Test Standards:

• TIA-568-C.2 and TIA 1152 Category 5, 5e, 6, 6A
• ISO/IEC 11801, EN 50173ISO Class C, D, E, EA, FA

Features:

• Supported frequency range: 1 MHz to 1600 MHz
• TIA Level IV accuracy
• Supported Copper Cable Tests
• Attenuation (Insertion Loss)
• Near End Crosstalk (NEXT) in pair to pair and sum format
• Attenuation to Crosstalk Ratio (ACRF) in pair-to and power-sum format
• Return Loss
• Loop Resistance, Wiremap
• Cable length, Total propagation delay and delay between pairs
• Removable/Rechargeable LiIon batteriesprovide about 8 hours of continuous operation.
• AC Power adapter: 100-240 V AC, plugs intothe power jack on the unit
• Size: 232 mm x 126mm x 86.7 mm)
• Weight: approx. 1.36 kg

Connectivity & Storage:

• More than 500 MByte (more than 2000 test results) internal flash memory
• 1GB USB Flash Drive included, allowsfor flexible record storage
• Probe Interface Connector
• Auxiliary 10/100 Mbit/s Ethernet port, RJ-45
• USB host and device interfaces
• Talkset interface: 3.5 mm stereo jack 

Includes:

• 2 x Identical WireXpert main units (for use as Main and Remote)
• Class FA cable certifcation software license
• 2 x Li-ion batteries
• 2 x Strap sets, stylus with cord and display covers
• 2 x CAT 6A channel adapters
• 2 x CAT 6A permanent link adapters
• 2 x CAT 6A permanent link test cords
• 1GB USB Thumb drive
• 2 x Talksets
• 2 x AC power adapters
• 2 x power cords
• 1 x Carrying case
• Calibration Certificate
• Quick Reference Guide